Mobile Home Skirting Installation ToolsText Box: SAFETY FIRST...With any construction project, always wear appropriate safety equipment. We recommend safety glasses and cut resistant gloves while applying the skirting. Also, be aware of electrical sources to avoid shock. Once the framework has been constructed, you can apply skirting panels. The skirting application should start at the top, then trimmed to fit your installation along the bottom edges. Tin snips can be used to cut skirting panels to fit specified configurations. Sheets may be trimmed and overlapped for areas with height greater than 28”. A level may be used to ensure a consistency throughout your installation. Skirting may be secured to framework two ways: 1.) Use a hammer and galvanized roofing nails (with rubber washers). 2.) Use a cordless drill and galvanized or stainless steel sheet metal screws. Screws offer a convenient way to remove panels in the event you need access to the crawl space below your home . Recommendation: Whether using nails or screws, we recommend you avoid applying the fastener in the “block” sections and only apply fasteners in the spaces between the blocks.

Click to proceed to skirting installation tips
Text Box: SITE MAP Text Box: CONTACT US#

Metal Mobile Home Skirting Installation Tools
DMAText Box: QUICK REFERENCE GUIDE

Click here for more mobile home owner information
Text Box: Home Text Box: Contact Us Text Box: Installation Text Box: Advantages Text Box: Product Info Text Box: Company Info Metal mobile home skirting

330 Industrial Park Drive SW

P.O. Box 206

Carrollton, OH 44615

Phone: (800) 452-0484

Fax: (330) 627-7090

Email:  dma@sevenranges.com
Text Box: APPLICATION GALLERY

  American Manufactured Product

Text Box: Cobblestone Photos

DMA metal mobile home skirting can be installed using a

variety of tools and hardware.